Revision History from Jan 10, 2021 to Aug 08, 2021

V1.27 Released 2021-08-08

  • When applying LoRaWAN sensor calibrations keep decimal precision the same as raw sensor readings.
  • Added support for three-point sensor calibration for clients requiring NATA accredited calibration.

    • V1.26 Released 2021-08-06

  • Added support for Dragino LTC2 LoRaWAN temperature sensor that supports PT100 temperature probe for -90 to 150C temperature measurements.
  • Added support for Dragino LLMS01 LoRaWAN leaf moisture sensor that measures leaf moisture and temperature for IoT agriculture applications.
  • Added support for Dragino LSPH01 LoRaWAN soil pH sensor that measures soil pH and soil temperature for IoT agriculture applications.

    • V1.25 Released 2021-08-04

  • Added calculation of relative humidity and ΔT (Delta-T) of dry bulb minus wet bulb temperature.

    • V1.24 Released 2021-07-26

  • When downloading personal data for account make sure all details are included such as SMS / voice alert phone numbers.
  • Fixed an error when generating audit report charts if a LoRaWAN node didn't send any data during the selected period.

    • V1.23 Released 2021-07-03

  • Added support for SeaBird SBE37 temperature, conductivity and pressure sensor connected over Dragino RS485-BL that allows self-contained battery operation.

    • V1.22 Released 2021-06-30

  • Added support for LSN50-S31 LoRaWAN Temperature & Humidity Sensor along with calculations for dew point and vapor pressure deficit (VPD).

    • V1.21 Released 2021-06-18

  • Made larger font sizes available when adding numeric display items to dashboard
  • Allow direct linking to a particular dashboard by adding ?name parameter, for example https://telemetry2u.com/Dashboard?name=In-Situ AquaTROLL 500.

    • V1.20 Released 2021-05-11

  • Added support for In-situ Aquatroll 500 Multiparameter Sonde that measures pH/ORP, turbidity, conductivity, temperature, pressure, salinity, resistivity, TDS (total dissolved solids) and density.

    • V1.19 Released 2021-05-05

  • When adding new alert conditions make 3 consecutive readings the default to avoid false triggers when first installing a sensor.
  • Allow recording of SIM card serial number and phone number along with Ethernet and WiFi MAC addresses next to gateways.
  • Fixed recently introduced problem downloading CSV and Excel reports of sensor data.

    • V1.18 Released 2021-04-28

  • Added numeric display to dashboard to display sensor values as plain text.

    • V1.17 Released 2021-04-21

  • Added support for Dragino LAQ4 LoRaWAN Air Quality Sensor that reports TVOC (Total Volatile Organic Compounds), eCO2 (equivalent CO2), temperature and relative air humidity.

    • V1.16 Released 2021-04-11

  • Added extra server monitoring and diagnostics for server support personnel.

    • V1.15 Released 2021-04-07

  • Changed LoRa transmit time interval parameter from being specified in seconds to minutes.

    • V1.14 Released 2021-04-06

  • Added timed relay control commands for Dragino LT-22222 / LT-33222 LoRa I/O Controllers so that a relay output can be toggled for 1-30 seconds.
  • When adding buttons to the dashboard allow parameter for command to be specified, may be left at default of zero for LoRa commands that don't require a parameter.

    • V1.13 Released 2021-03-27

  • Added a new report type to show commands sent to sensor nodes along with time sent / acknowledged and name of person that sent the command.

    • V1.12 Released 2021-03-26

  • Allow labels to be added to individual sensor inputs under node maintenance menu that is displayed instead of input names on reports, charts etc.

    • V1.11 Released 2021-03-25

  • Added max charts parameter to allow specifying maximum number of charts that will be displayed before multiple inputs are consolidated onto one chart.

    • V1.10 Released 2021-03-24

  • When only two inputs are selected show them on individual charts with red and blue lines to indicate upper and lower limits.

    • V1.09 Released 2021-03-18

  • Added zoom facility to charts page enabled by dragging mouse / finger over region of interest.
  • When upper and lower limits defined in audit reports show them in statistics area at bottom of charts.
  • Added additional offset for second upper/lower limits on charts to provide separation between them.

    • V1.08 Released 2021-03-17

  • Added support for SeaBird SBE37 temperature, conductivity and pressure sensor.

    • V1.07 Released 2021-03-05

  • Display upper and lower limits defined in audit reports for particular sensor as dotted lines on the charts page.

    • V1.06 Released 2021-02-03

  • Add date range selection to report and chart pages to allow easier selection of date ranges.
  • When selecting a different node on the reports page automatically load data using current date selection.

    • V1.05 Released 2021-01-21

  • Added scheduled jobs to audit admin menu that allows audit reports to be scheduled to run and e-mailed automatically.
  • Added Google reCAPTCHA to contact us page

    • V1.04 Released 2021-01-18

  • When opening charts page default to last node that was viewed.

    • V1.03 Released 2021-01-12

  • When copying a dashboard to another user overwrite the existing definition if the name matches exactly.

    • V1.02 Released 2021-01-11

  • When adding text to dashboard allow changing of font size, justification & other attributes.

    • V1.01 Released 2021-01-10

  • Initial public release after private beta testing concluded.
  • Changed menu layout and structure between logged in users and anonymous users.
  • Added landing page and documentation / help pages.
    • View Later Versions