Revision History from Aug 08, 2022 to May 30, 2023

V2.35 Released 2023-05-30

  • Added support for Dragino SW3L - LoRaWAN Outdoor Flow Sensor.
  • When setting up nodes show LoRaWAN frequency plan and device class as separate fields.

    • V2.34 Released 2023-05-29

  • For devices using a custom LoRaWAN decoder when an unknown packet is received treat input values as unknown rather than invalid so that alerts aren't triggered.

    • V2.33 Released 2023-05-22

  • Updated layout of admin page.
  • On alerts summary in audit report place "-" in the time triggered column when the same as the row above to make it obvious notification was part of the same alert.

    • V2.32 Released 2023-05-21

  • When showing alert history report place "-" in the time triggered column when the same as the row above to make it obvious notification was part of the same alert.
  • Add e-mail address to users list under admin menu.

    • V2.31 Released 2023-04-25

  • Added no change condition to alerts that will trigger if the sensor value is the same as the last one received.
  • Added change above / below condition to alerts that will trigger if the difference between the current sensor value and the previous is above or below the specified threshold.

    • V2.30 Released 2023-04-24

  • Added widget to dashboard that displays sensor name, reading, units, RSSI and data rate in a single block.
  • Added support for BGA-PE (Blue Green Algae Sensor - Phycoerythrin) Fluorescence and concentration sensor attached to Aquatroll 500 Multiparameter Sonde.

    • V2.29 Released 2023-03-27

  • Added support for Dragino LDS03A outdoor LoRaWAN open/close door sensor.

    • V2.28 Released 2023-03-20

  • On default reports page that shows readings for all sensors use the node label (when available) instead of the default input name.

    • V2.27 Released 2023-03-19

  • Implemented new LoRaWAN subscription plans and pricing for customers providing their own hardware.

    • V2.26 Released 2023-03-13

  • Added support for voucher codes that will be supplied with LoRaWAN hardware purchases from the Telemetry2U Store and third-party resellers.

    • V2.25 Released 2023-03-11

  • Added support for Dragino LT-22222-L LoRaWAN I/O Controller.

    • V2.24 Released 2023-03-07

  • Added support for Dragino PS-LB LoRaWAN Air Water Pressure Sensor.

    • V2.23 Released 2023-03-04

  • Allow 2-point calibrations to be applied to custom devices and all node inputs.
  • Added Mid-Big Endian (BADC) and Mid-Little Endian (CDAB) to supported byte orders in custom device packet designer.

    • V2.22 Released 2023-03-01

  • Added support for In-Situ Aqua TROLL 600 Multiparameter Sonde over Modbus via NB-IoT, LTE or LoRaWAN.

    • V2.21 Released 2023-02-26

  • Added last access time to user list for company administrators.

    • V2.20 Released 2023-02-19

  • Added "Enable Zoom" button to chart pages so that default behaviour of mouse wheel and swiping is scrolling rather than zooming.

    • V2.19 Released 2023-02-17

  • Added support for Milesight UC51x LoRaWAN wireless solenoid valve controller.

    • V2.18 Released 2023-02-15

  • On multi-node charts use last viewed node list and input as default.
  • Fixed an error that could occur with FDA 21 CFR Part 11 compliance enabled when duplicate requests received within several milliseconds.

    • V2.17 Released 2023-02-13

  • Added new timeline view to charts menu to display a colour coded 7-day summary of the transmission and alert status for all nodes linked to your account.

    • V2.16 Released 2023-02-12

  • Added multi-node charts as a pull-down item under the charts menu item.

    • V2.15 Released 2023-01-29

  • For trial / PAYG customers send a one-off reminder e-mail when the subscription is three days away from expiring.

    • V2.14 Released 2023-01-28

  • Allow searching and column sorting on administration index pages.
  • Add ability to export administration index pages as Excel, CSV or PDF files or to copy them to the clipboard.

    • V2.13 Released 2023-01-22

  • Added support for PAR (photosynthetically active radiation) sensor connected to In-Situ - Aqua TROLL 500 Multiparameter Probe.

    • V2.12 Released 2023-01-18

  • Added support for Milesight WS101 Smart Button that can be used for wireless control and emergency panic alerts.

    • V2.11 Released 2023-01-10

  • When hovering items on dashboard that are hyperlinked to charts display cursor as a chart icon.

    • V2.10 Released 2023-01-08

  • Added trendline to dashboard to show chart of sensor readings for previous 24 hours.

    • V2.09 Released 2023-01-06

  • Added support for In-situ Aquatroll 500 Multiparameter Sonde over Modbus RS-485 / NB-IoT.

    • V2.08 Released 2023-01-03

  • Added note to Helium Network Coverage Map about selecting density to change size of circles that indicate expected Helium network range.

    • V2.07 Released 2023-01-01

  • Added instructions and tooltips to administration pages.
  • Treat latitude / longitude of -1 received from Dragino LGT92 LoRaWAN GPS and Motion Tracker as invalid.

    • V2.06 Released 2022-12-30

  • When more than two charts are displayed on devices with a small screen leave a border at the side for easier scrolling.
  • When a new user accepts an invitation send an e-mail back to the person that created the account so they may continue setting up access control.

    • V2.05 Released 2022-12-23

  • Add sensor serial number, equipment make, set point and required calibration accuracy to node details for production of NATA traceable temperature verification reports.

    • V2.04 Released 2022-12-22

  • Add panning and zooming to charts, drag with mouse button down to pan and use mouse wheel to zoom. On mobile devices use pinch zooming and dragging to pan.

    • V2.03 Released 2022-12-19

  • When an expired PAYG account is renewed make sure all linked users have their access reinstated.

    • V2.02 Released 2022-12-18

  • Add new translators under node input labels for yes / no and alarm / no alarm.
  • Display translated values on reports page.

    • V2.01 Released 2022-12-13

  • When a user is removed that "owns" company-wide dashboards reassign those dashboards to the current admin user instead of removing.
  • Display a message when trying to delete a company-wide dashboard created by someone else instead of generic dashboard not found message.
  • When attempting to edit a company-wide dashboard created by someone else display a message instead of creating a new blank dashboard.
  • Added document types for Service Report and Verification Certificate.

    • V2.00 Released 2022-12-12

  • Display documents in an accordian menu containing all nodes to make it easier to identify devices without a calibration certificate on file.

    • V1.99 Released 2022-11-28

  • Added support for Dragino N95S31B1 NB-IoT Temperature & Humidity Sensor.

    • V1.98 Released 2022-11-20

  • Added general statistics page to show minimum, maximum, average and standard deviations for selected input along with node alert count.
  • First public release of statistics page, available as drop-down under Reports tab.

    • V1.97 Released 2022-11-19

  • Allow chill temperature and growing temperature to be changed on crop growing statistics page.

    • V1.96 Released 2022-11-16

  • Added day/night temperatures to statistics page.
  • Show a banner when demo mode is active to indicate logout button may be pressed to return to product / contact info.

    • V1.95 Released 2022-11-04

  • Added support for Dragino NSE01 - NB-IoT Soil Moisture & Soil Conductivity (EC) sensor.

    • V1.94 Released 2022-11-01

  • After performing sensor calibration characterisation set transmit interval back to correct value.
  • Retrieve salinity reading from In-situ Aquatroll 500 Sonde.

    • V1.93 Released 2022-10-29

  • On dashboards display an orange border around any items for which the data is over three hours old.

    • V1.92 Released 2022-10-26

  • Added translator to node input labels page to allow conversion of 0/1 values to open/closed, on/off etc.

    • V1.91 Released 2022-10-10

  • Added support for Netvox R602A LoRaWAN siren / alarm strobe.

    • V1.90 Released 2022-10-06

  • Allow demonstration dashboards to be embedded into other web sites via iframes.

    • V1.89 Released 2022-10-02

  • Added scaling factor to node input labels page to allow magnitude of units to be changed.
  • On alert page added to and from times to allow alerts to only be triggered between certain times of day for LoRaWAN security applications.

    • V1.88 Released 2022-08-23

  • Allow system administrators to move NATA calibration certificates between companies.

    • V1.87 Released 2022-08-16

  • Added multi-node chart page to allow comparison between the same input on different sensors. Can be accessed via icon on charts page second from the right.

    • V1.86 Released 2022-08-08

  • Allow company administrators to copy dashboards from other users within the company.
  • When copying a dashboard make default destination name the same as the dashboard being copied.
    • View Earlier Versions View Later Versions