LoRaWAN IoT - Analogue / Digital Sensor Interface

Dragino RS485LN RS485 to LoRaWAN Converter

The Dragino RS485LN can be programmed with up to 16 commands that are sent to devices via RS485/MODBUS. The sensor responses are combined into a single packet and uploaded to T2U via LoRaWAN. It can be configured via a USB port or by using T2U downlink commands. Its runs in Class-C mode and has a voltage input range of 7-24V making it suitable for a huge range of applications.

Features & Applications

RS485 MODBUS communication protocol
16 commands to talk to up to 16 devices
Ability to cut and paste data from sensor response to form final payload
Powered from 7-24V
Runs in Class-C mode
External antenna for extra long range
Communicates with a host of industrial sensors

Plug-and-play compatible with T2U's IoT Platform

RRP: $139-

Dragino LT22222L LoRaWAN I/O Controller

The LT-22222-L is a Long Range LoRaWAN I/O Controller offering multiple I/O Interfaces including, analogue current inputs 4-20mA), analogue voltage inputs, digital inputs, digital outputs, and relay outputs. The LT22222L is designed to simplify the installation of I/O monitoring while providing excellent performance. It has a 7-24V input voltage range and comes with an external antenna for up to 10Km range.

Features & Applications

2 x 24V ADC inputs
2 x 4-20mA inputs
2 x pptically isolated digital inputs
2 x digital outputs
2 x relay outputs
Powered from 7-24V
Runs in Class-C mode
External antenna for extra long range
Can set sensor trigger points to immediately send an uplink

Plug-and-play compatible with T2U's IoT Platform

RRP: $79-

Dragino RS485-BL RS485 to LoRaWAN Converter

The Dragino RS485LN can be programmed with up to 16 commands that are sent to devices via RS485/MODBUS. The sensor responses are combined into a single packet and uploaded to T2U via LoRaWAN. It can be configured via a USB port or by using T2U downlink commands. Unlike the RS485LN, it is battery operated and can provide a 3.3/5V output to power external sensors

Features & Applications

RS485 MODBUS communication protocol
16 commands to talk to up to 16 devices
Ability to cut and paste data from sensor response to form final payload
Powered from an 8500mA/h Lithium battery
Runs in Class-C mode
External antenna for extra long range
Communicates with a host of industrial sensors

Plug-and-play compatible with T2U's IoT Platform

RRP: $TBD-

Dragino LSN50V2 LoRaWAN Wireless I/O Node

The Dragino LSN50V2 is an open-source project so can easily be customised to suite just about any application. The default firmware can support digital temperature sensors, digital inputs/interrupts, HX711 load cells, LiDAR-Lite V3HP, SHT20 and more. It does not come with sensors, but connection is made easy with the onboard terminal blocks. Its battery operated with an external antenna that can achieve up to 10Km

Features & Applications

Can connect to a few pre-configured sensors
On-board terminal blocks for easy connection
Powered from an 8500mA/h Lithium battery
IP65 Waterproof housing
Runs in Class-A mode with up to 10 year battery life
External antenna for extra long range
Ideal for DIY or custom applications

Plug-and-play compatible with T2U's IoT Platform

RRP: $119-

Netvox R718IA LoRaWAN 0-5V ADC

The RA718IA runs on user replaceable ER14505 Lithium batteries and has a magnetic base for easy mounting. The 2 x 12-bit ADC’s have a 0-5V input range with a 1.14Msps sample rate, making it suitable for interfacing to many sensors and instrumentation. The raw data can be scaled and calibrated on Telemetry2U, with the processed data clearly displayed on your IoT dashboards, charts, and tables.

Features & Applications

Single or dual input options
0-5V 12-bit ADC range
1.14Msps sample rate
Powered from 2 x ER14505 Lithium batteries for years of operation
Magnetic mount on waterproof housing
Will immediately send an uplink if sensor value crosses threshold
Low battery warning
Configurable with T2U downlink commands

Plug-and-play compatible with T2U's IoT Platform

RRP: $159-

Netvox R718IB LoRaWAN 0-10V ADC

Features & Applications

Single or dual input options
0-10V 12-bit ADC range
1.14Msps sample rate
Powered from 2 x ER14505 Lithium batteries for years of operation
Magnetic mount on waterproof housing
Will immediately send an uplink if sensor value crosses threshold
Low battery warning
Configurable with T2U downlink commands

Plug-and-play compatible with T2U's IoT Platform

RRP: $155-

Netvox RA718KA LoRaWAN 4-20mA Sensor

Features & Applications

Single or dual input options
Powered from 2 x ER14505 Lithium batteries for years of operation
Magnetic mount on waterproof housing
Will immediately send an uplink if sensor value crosses threshold
Low battery warning
Configurable with T2U downlink commands

Plug-and-play compatible with T2U's IoT Platform

RRP: $169-

Netvox RA718KA LoRaWAN 4-20mA Sensor

Sensors with a pulse output are commonly found on agricultural equipment, electricity meters, water meters, gas meters and more. The R718H pulse counter can measure pulses in the range of 2.4-3.3V with an adjustable filter time. It will report at intervals or when the count reaches a pre-defined value. Telemetry2U can configure all settings remotely via downlink command. The magnetic base makes for easy mounting.

Features & Applications

Single or dual input options
2.4-3.3V input range with adjustable filter
Powered from 2 x ER14505 Lithium batteries for years of operation
Magnetic mount on waterproof housing
Will immediately send an uplink if sensor value crosses threshold
Low battery warning
Configurable with T2U downlink commands

Plug-and-play compatible with T2U's IoT Platform

RRP: $159-

Netvox R718J LoRaWAN Dry Contact Interface

Dry contact interfaces can easily read the open or close status of a switches, relays, buttons as well as disconnections. This makes the R718J compatible with a host of devices with external relay alarm outputs like fridges, freezers, incubators, etc. T2U receives an uplink as soon as the contact state changes and can trigger Email/SMS or voice alerts to ensure your assets and contents are constantly monitored IoT platform.

Features & Applications

Single or dual input options
Powered from 2 x ER14505 Lithium batteries for years of operation
Magnetic mount on waterproof housing
Will immediately send an uplink if sensor value crosses threshold
Low battery warning
Configurable with T2U downlink commands
Perfect for detecting relay outputs on common laboratory equiptment

Plug-and-play compatible with T2U's IoT Platform

RRP: $159-

Netvox R311CA Dry Contact interface

Small and powered from 2 x CR2450 Lithium batteries, the R311CA is compatible with a host of devices with external relay alarm outputs like fridges, freezers, incubators, etc. T2U receives an uplink as soon as the contact state changes and can trigger Email/SMS or voice alerts to ensure your assets and constants are constantly monitored on our IoT platform.

Features & Applications

Single or dual input options
Powered from 2 x CR2450 Coin Cells
Will immediately send an uplink if sensor value crosses threshold
Low battery warning
Configurable with T2U downlink commands
Perfect for detecting relay outputs on common laboratory equiptment

Plug-and-play compatible with T2U's IoT Platform

RRP: $139-

Netvox R718IJK LoRaWN Multi-Sensor Interface

The R718IJK combines multiple sensor types into a single node. It runs of 2 x ER14505 lithium batteries for longer life and can be magnetically mounted. It will send a report to T2U every 15 minutes by default, or when and of the inputs change by more than a programmed amount which can trigger an alert. T2U also displays the data on configurable IoT dashboard and charts with the ability to calibrate the sensors.

Features & Applications

1 x 0-24V ADC input
1 x 4-20mA input
1 x Dry contact input
Low battery warning
Configurable with T2U downlink commands

Plug-and-play compatible with T2U's IoT Platform

RRP: $210-

Netvox R718PC RS485 to LoRaWAN

The R718PC can be programmed with a single MODBUS command that it uses poll an RS485 sensor at programmed intervals before sendind the response to T2U. It is 12V operated and runs in Class-C mode meaning it is awake all the time to receive commands. RS485 sensors are in abundance making this a wise choice for many sensor types in the industrial, aquaculture and agriculture industries.

Features & Applications

Can poll RS485 sensors
7-24V operated
Runs in Class-C mode
Low battery warning
Configurable with T2U downlink commands
Can connect to a wide range of industrial and professional sensors

Plug-and-play compatible with T2U's IoT Platform

RRP: $229-

Netvox R718PDA RS232 to LoRaWAN

The R718PDA can be programmed with a single RS232 command that it uses poll a sensor at programmed intervals and the sends the response to Telemetry2U. It is 12V operated and runs in Class-C mode meaning it is awake all the time to receive commands from T2U. RS232 sensors are in abundance making this a diverse interface for many sensor types in the industrial, aquaculture and agriculture industries.

Features & Applications

Can poll RS232 sensors
7-24V operated
Runs in Class-C mode
Low battery warning
Configurable with T2U downlink commands
Can connect to a wide range of industrial and professional sensors

Plug-and-play compatible with T2U's IoT Platform

RRP: $239-

LoRaWAN Analogue / Digital Interface Nodes

Looking to keep your own sensors on the Telemetry2U network? Get real-time updates on all the sensors in your operation with one of our many interface nodes. Quickly and easily put any digital or analogue sensor onto the cloud. Read on or Get in Touch for more information.

Dragino RS485LN
RS485 to LoRaWAN Converter

Communicates with RS485/MODBUS devices and connects to T2U via LoRaWAN

Dragino LT22222L
LoRaWAN I/O Controller

Offers a host of sensor input interface options and a couple of relay outputs.

Dragino RS485-BL
RS485 to LoRaWAN Converter

Battery Powered RS485/MODBUS to LoRaWAN converter connects to a huge range of sensors

Dragino LSN50V2
LoRaWAN Wireless I/O Node

Offers multiple input interface types including ADC, UART, IC2 and more.

Netvox R718IA
0-5V ADC

12V-bit 0-5V ADC(s) on a 1-meter cable. Single or dual channels available.

Netvox R718IB
0-10V ADC

12V-bit 0-10V ADC(s) on a 1-meter cable. Single or dual channels available.

Netvox RA718KA
4-20mA Sensor

4-20mA to LoRaWAN converter on a 1-meter cable. Single or dual channels available.

Netvox R718H
Pulse Counter

4-20mA to LoRaWAN converter on a 1-meter cable. Single or dual channels available.

Netvox R718J
Dry Contact Interface

LoRaWAN dry contact interface with single or dual channel options on a 1-meter cable.

Netvox R311CA
Dry Contact interface

LoRaWAN small dry contact interface with single or dual channel options.

Netvox R718IJK
Multi-Sensor Interface

Offers 1 x 0-24V ADC, 1 x 4-20mA and a dry contact interface all in one

Netvox R718PC
RS485 to LoRaWAN

Sends RS485 MODBUS commands to a sensor and uploads response to Telemetry2U

Netvox R718PDA
RS232 to LoRaWAN

Sends RS232 commands to a sensor and uploads response to Telemetry2U

LoRaWAN IoT Devices We Support

Security Sensors

Air Quality Sensors

Analogue / Digital Interface

Liquid Leak & Level Sensors

Temperature & Humidity Sensors

GPS / Motion Sensors for Asset Management

Soil Moisture, EC and Temperature Sensors

Power Meters / Controllers

Have we missed something? Telemetry2U provides LoRaWAN sensor nodes for almost every application and environment. But if you have custom requirements or another type of sensor in mind, get in touch with us today! We'll add your device to our IoT platform for a true plug-and-play experience.

We make it easy to get in touch

LoRaWAN Analogue / Digital Interface Nodes

Looking to keep your own sensors on the Telemetry2U network? Get real-time updates on all the sensors in your operation with one of our many interface nodes. Quickly and easily put any digital or analogue sensor onto the cloud. Read on or Get in Touch for more information.

Dragino RS485LN RS485 to LoRaWAN Converter

Dragino LT22222L LoRaWAN I/O Controller

Dragino RS485-BL RS485 to LoRaWAN Converter

Dragino LSN50V2 LoRaWAN Wireless I/O Node

Netvox R718IA 0-5V ADC

Netvox R718IB 0-10V ADC

Netvox RA718KA 4-20mA Sensor

Netvox R718H Pulse Counter

Netvox R718J Dry Contact Interface

Netvox R311CA Dry Contact interface

Netvox R718IJKMulti-Sensor Interface

Netvox R718PCRS485 to LoRaWAN

Netvox R718PDARS232 to LoRaWAN

LoRaWAN IoT Devices We Support

Have we missed something? Telemetry2U provides LoRaWAN sensor nodes for almost every application and environment. But if you have custom requirements or another type of sensor in mind, get in touch with us today! We'll add your device to our IoT platform for a true plug-and-play experience.

Dragino RS485LN
RS485 to LoRaWAN Converter

Dragino LT22222L
LoRaWAN I/O Controller

Dragino RS485-BL
RS485 to LoRaWAN Converter

Dragino LSN50V2
LoRaWAN Wireless I/O Node

Netvox R718IA
0-5V ADC

Netvox R718IB
0-10V ADC

Netvox RA718KA
4-20mA Sensor

Netvox R718H
Pulse Counter

Netvox R718J
Dry Contact Interface

Netvox R311CA
Dry Contact interface

Netvox R718IJK
Multi-Sensor Interface

Netvox R718PC
RS485 to LoRaWAN

Netvox R718PDA
RS232 to LoRaWAN